Copyright: StlHEditor Copyright (C) 2000, Ascher Stefan


Backpicture

Enter here the filename which you want to use as Backgroundpicture for the Document.


Browse

Use this Button to display a Dialog for choosing a filename.


Backcolor

Choose here the Backgroundcolor of the Document.


Textcolor

Choose here the default textcolor of the Document.


Linkcolor

Choose here the textcolor from Links in the Document.


Visited Link

Choose here the textcolor from links which was already visited in the Document.


Active Link

Choose here the textcolor from Links which have the focus in the Document.


Choose Color

Use this Button to show a Dialog for choosing Colors.


Upper Margin

Internet Explorer allows you to define the upper Margin in Pixel. Here you can enter the count of Pixels IE should use as upper Margin.

This is only supported by the Internet Explorer from Version 2, and you should use instead of this Style Sheets, recommended by the W3C.


Left Margin

Internet Explorer allows you to define the left Margin in Pixel. . Here you can enter the count of Pixels IE should use as left Margin.

This is only supported by the Internet Explorer from Version 2, and you should use instead of this Style Sheets, recommended by the W3C.


Preview
This is the Preview of the Body from the Document.


Address

Enter here the whole URL, you want to download. This program isn’t clever enough (like some browsers) to interpret incomplete URL’s, like “www.codearchive.com”, actually it should look like this: “http://www.codearchive.com/”, OK, the trailing Slash isn’t necessary.


Save to locale System

If this is checked, the file is saved to the locale system with a given filename, you must enter a filename before you download the file in the TextBox bellow.

This file will be added to your project, so make sure, you use an unique filename, you can‘t choose a filename which is already a member from your current project.


Filename

Enter here the filename you want to save the downloaded Document.

This file will be added to your project, so make sure, you use an unique filename, you can‘t choose a filename which is already a member from your current project.


Save as

Use this Button to display a Dialog for choosing a filename.


IE Favoriten

Use this button if you wish to open an URL from an Internetlink file (*.url). An Open-Dialog will appear for choosing an *.url file.


NS Bookmarks
NS Bookmark

Use this button, if you wish to open an URL from your Natscape Bookmark List. An Open-Dialog will appear for choosing your Bookmark List file, usually a HTML Document. Choose a file an a list will popup with all links contained by this Document. In this List you can choose the Link you want to open.


Netscape Bookmarks

This list contains all Links in your choosen HTML file, to select one, click on it.


Cancel

Use this Button to close the Window, and don’t download anything.


Open

Use this Button to open the specified URL. This requires an Internetconnection, if there is none active, you’re forced to connect to the Internet.


Contexthelp

StlHEditor Contexthelpfile Copyright © 2000, Ascher Stefan

This file is used to display contextsensitive help found in some Dialogs from the Program StlHEditor.


Protocoll

Choose here the Protocoll for the Link to insert.


URL

Enter here the URL your Link should refering to.


Name

Here you can specify the Name of the Link.


Target

Enter or choose here the Target, in which the Link should be opened.

There are four predefined Targets:

_blank: A new Browserwindow is opened and the link is loaded in this window.

_parent: The Link is loaded in the parentframe.

_self: The Link is loaded in same window or frame (default).

_top: The Link is displayed in the whole window.


Displayed Name

This is the displayed Name from the Link:

Example:

<a href=”http://www.codearchive.com/”>Displayed Name</a>

this will look this: Displayed Name


Title

Some Browsers display this text in a small Tooltipwindow.


Statusbar

If you wish, you can specify the Text which should be displayed in the Statusbar, when the Mouse moves over the Link.

Enter here the Text to display in the Statusbar of the Browser.


Style Default
Syle Dafault

If this is activated an ordinary Link is inserted.


Style Button

If this is activated, a button is inserted as a Link.


IE Favoriten

Use this button if you wish to insert a Link from an Internetlink file (*.url). An Open-Dialog will appear for choosing an *.url file.


NS Bookmarks

Use this button, if you wish to insert a Link from your Natscape Bookmark List. An Open-Dialog will appear for choosing your Bookmark List file, usually a HTML Document. Choose a file an a list will popup with all links contained by this Document. In this List you can choose the Link you want to insert.


Netscape Bookmarks

This list contains all Links in your choosen HTML file, to select one, click on it.


OK

Use this Button to insert the Link, and to close this window.


Cancel

Use this Button to close this window, and don’t insert a Link.


Saved File

- Size: Shows the size of the saved file. If this file isn‘t still saved, “File not saved” is displayed.

- Modem: Choose the speed of the Modem for calculating the estimated downloadtime.

- Time: Displays the estimated downloadtime. This time depends only from the filesize and the modemspeed.


Current Document

- Title: Shows the Title from the active Document.

- Size: Shows the filesize from the active Document, this need not be the same size as from the saved file.

- Caracter count: Shows the count of Characters in the active Document.

- Line count: Shows the count of lines in the active Document.

- Modem: Choose the speed of the Modem for calculating the estimated downloadtime.

- Time: Displays the estimated downloadtime. This time depends only from the fiesize and the modemspeed.


Readonly

If this CheckBox is checked, the active Document is writeprotected, you can even modify it from here.


Close

Closes this window.


Toolbar

This is the Toolbar, for easy add, remove etc. folders.

This Toolbar has five Buttons:

- Add folder: Shows the Browse for Folder Dialog for choosing a folder to add to the list.

- Remove folder: Removes the select folder from the list.

- Remove all: Removes all folders from the list.

- Select all: Select all folders in the list. Only selected folders are searched.

- Deselect all: Deselects all folders in the. Only selected folders are searched.


List

All folders are listed in this list. To select a folder mark it as checked. Only selected folders are included in the search.


Filefilter

Enter here the filefilter for the search in files. This filefilter is only relevant for the folders in your list, only files matching this filter are included in the seach, but if you add the projectfiles all projectfiles are searched.

You can only use one filefilter, you can’t use more like this “*.htm;*.css”. You can also use wildcards like “*” and “?”.


Include Projectfiles

If this is checked, all projectfiles are included in the search. The filefilter doesn’t take affect here.


Some idle time
Some idle time (slower)

Use this to get the Find in Files program to build in some idletime. This makes the search slower (on my Computer about 10 times slower), but the computer has some time to do other things.

The Find in Files program will wait 50 ms, before a file searched.


Searchtext

Enter here the Text you want to search for.


Match case

Finds all occurrences with the exact combination of uppercase and lowercase letters specified in the Searchtext box.


Find

This button will close the Window and start the search, the Outputwindow appear, and all matches are written in it.

Made modifications from the folderlist and the other settings are saved and restored the next time you call this Dialog.


Cancel

This button closes the Window, without starting the search.

Made modifications from the folderlist and the other settings will go lost.


Display Linetext

If this is checked, the Find in Files Program displayes the text of the whole Line an occurrence was found.

Note:

The Text from the output should not exceed 64 KB, if you have a lot of occurrences and display the Linetext, 64 KB is not much. You can display more than 64 KB in a Textbox on WinNT, but not on Win9x. You can’t open the file with a doublecklick, when the line is displayed bellow the 64 KB limit neither on Win9x nor on WinNT.


Clear Outputwindow first

Check this, if you want to clear the Outputwindow in which the occurrences are displayed, before the Find in Files Program writes the new occurrences in it.


Code File (Applet)
Code File (Applet) (required field)

Enter here the filename from the Applet, usually a *.class file


Codebase

Is the Applet located in an other folder than the Document, which loads it, enter here the relative path to the Applet file, when it’s on the same Server, otherwise use the absolute address.

Example:

The HTML Document which contains this Applet is loacated at the Root, e.g. “http://www.yourdomain.com/appletdoc.htm”.

The Applet itself is locatet in a subdirectory called “applets”, this means at “http://www.yourdomain.com/applets/yourapplet.class”.

Then you have to enter here as Codebase “applets”.

If your applet is in the same folder, leave it blank.


Name

Here you can enter the name of the Applet.


Alernative Text
Alternative Text

If the Applet can’t be executed (e.g. disabled Java), you can specify here an alternative text to display.


Height

This is the place to specify the height of the Applet in Pixel or Percent.


Width

This is the place to specify the width of the Applet in Pixel or Percent.


VSpace

Enter here the vertical space from the Applet to it’s environment in Pixel or Percent.


HSpace

Enter here the horizontal space from the Applet to it’s environment in Pixel or Percent.


Filename

Enter here the filename for the Document. You should use this, because then the program can calculate relative paths to other files e.g. Pictures, Stylesheets etc.


Title

Enter here the Title of the Site. You should give each Site a title because the Browser displays it in the Titlebar, it uses to bookmark the site and so on.


Documenttype

This specifies the used language for the the Document.


Stylesheets

Here you can enter a Style Sheets file (*.css), which is used to format the Document.


Description

Enter here a small description of the site. This information are used by searchengine robots.


Type

Choose here the Type of the Document.


Keywords

Enter here some keywords seperated from commas. This informations use searchengines.


Creation Date

Enter here the Date when you created this HTML Document. Use the GTM (Greenwich-Time) Timezone.

Example:

1998-04-30T08:49:37+00:00

A HTML Document with this Date would be created at 30 of April 1998 / 8:49:37

+00:00 means the difference to the Greenwich-Time.


Expires Date

Enter here the Date, when this Document expires, use the GTM (Greenwich-Time) Timezone.

Example:

1998-04-30T08:49:37+00:00

A HTML Document with this Expiresdate will expire at 30 of April 1998 / 8:49:37

+00:00 means the difference to the Greenwich-Time.

You can also use the count of Seconds, in which the Site is expired.


Copyright

Enter here Your Name and the year here.

Example:

Ascher Stefan - 2000


Revisit

Says the Searchengine Robots, when they should come again.

Example:

30 days


Don't index
Don’t index

Says Searchengine Robots, that this Site should not be submitted to the Database of the Searchengine.


Don't follow Links
Don’t follow Links

Don’t allow the Searchengine Robots to follow Links.


E-Mail Address

Enter Your E-Mail Address here.


Language

Enter or choose here the language you use for the contents on this Site.


Help

Displays a Helptopic for the current Dialog or Window.


OK

Applies the changes, and closes this Window.


Cancel

Doesn’t apply any changes, and closes this Window.


Backpicture
Backgroundpicture

Enter here the filename from the backgroundpicture you want to use for the table.


Backcolor
Backgroundcolor

Enter here the color of the background of the table.


Bordercolor

Enter here the color of the borders of the table.


Light Border Color

Enter here the color of the light lines in the tableborder.


Dark Border Color

Enter here the color of the dark lines in the tableborder.


Preview
This is the preview of the table.


Align

Choose here how the text should be aligned.


OK

Use this button to apply the settings and to close this window.


Cancel

Use this button, if you don’t want to use this settings and to close this window.


Toolslist

This is the list with all defined tools.

A rightclick openes a popup Menu with commands you can also find in the toolbar.

You can move items up or down with Drag and Drop or the Toolbarbuttons “Up” and “Down”.


Command

Enter here the filename of the program you want to call with this menuitem, and alle paramters to pass to this program.

Parameters:

- %1: Use this placeholder for the filename of the active document.

- %P: Use this placeholder for the path of the active document without trayling backslash.


> (Paramters)
> (Parameters)

This button opens a Menu, with which you can insert paramters into the commandline.


Workingdirectory

Choose or enter here the workingdirectory for the called program.

There are three predifined Constants:

- Documentpath (${Document}): The path of the active document.

- Programpath (${Program}): The path of the called program.

- Projectpath (${Project}): The path of the current Project, if one is opened.

This Constants are caseinsensitive.

You can insert one of this Constants with the Menu, which appears when you click the Constants Button.


Windowmode

Choose here how the called program should be displayed.

- Hidden: Window is hidden and focus is passed to the hidden window.

- Normal with focus: Window has focus and is restored to its original size and position.

- Minimized with focus: Window is displayed as an icon with focus.

- Maximized with focus: Window is maximized with focus.

- Normal without focus: Window is restored to its most recent size and position. The currently active window remains active.

- Minimized without focus: Window is displayed as an icon. The currently active window remains active.

This doesn’t take affect, when “Redirect to Outputwindow” is activated.


Options

You can setup here some options:

- Redirect to Outputwindow: If the called program is a consoleprogram, you can redirect the output from this program to StlHEditor. StlHEditor displays this output in the outputwindow.

- Compilerfileter: The Output Consoleprograms contains sometimes Errormessages and similar (e.g. Compiler) with linenumbers. You can jump to this line with doubleclicking on the line in the outputwindow, but this program don’t knows how this linenumbers look like, so you have to define some rules.

- Wait until program is closed: If this is activated, StlHEditor waits with the programexecution until the called program is closed.

This doesn’t take affect, when “Redirect to Outputwindow” is activated.

- Use short filenames: If this is activated, all filenames are passed as Short Filenames.

- Make Backup copy first: This is to bring StlHEditor to make a Backupcopy from the active Document, before the Tool is called. The Backup file has the name from the active Document with the extension “.bak”.


Save

Here you can force the program to save the file, before the tool is called:

- No: Nothing is saved.

- Only active Document: Onmly the active document is saved.

- All: All opened files are saved.

Prompt before saving: You’re promted to save the file.


OK

Saves the tools, and closes the Window.


Cancel

Don’t saves the settings, and closes the Window.


Help

Shows a Messagebox with some Informations.


Constants

This Button shows a Popup Menu, with which you can insert the Constnts.


Scriptlanguage

Choose here the language of the Script, e.g. JavaScript, VBScript etc.


Scripttype

Choose here the type of the Script.


Source

Enter here the filename of the script, if it’s an external file, e.g. a *.js file.


Script

Enter here the Script itself, the code of the Script.


OK

Use this button, to insert the Script, and to close this window.


Cancel

Use this button, if you don’t want to insert anything, and to close this window.


http-equiv

Check this Option Button to add a “http-equiv” Metatag.


name

Check this Option Button to insert an other Metatag than an “http-equiv” Metatag.


Name

Choose or enter here the Metatag to add to the list.


Value

Choose or enter here the value of the Metatag to insert.


Metataglist

Here are all Metatags listed to insert into the document.


OK

Use this button to insert the listed Metatags into your document, and to close the window.

All Metatag insertet with this Dialog will be in the Head Section, the place for Metatags is usually the Head Section ;-).


Cancel

Use this button to close the window, and don’t insert any Metatags.


Helpfiles List

This List contains all defined Helpfiles. Each Item appears as a Menuitem in the Help Menu. If you want to call one of this Helpfile, click on the corresponding Menuitem.


Helpfile

Enter here the Filename with which the Menuitem should be associated. This File will be called when you use this Menuitem.


Use
Use this Helpfile as defaulthelp for the filetype

You can define for each filetype a seperate default Helpfile, choose here, with which filetype this Helpfile should be associated.

For Example:

You have the Filetype *.java associated with the Helpfile from the Java Development Kid, then this Helpfile will be called when you have a *.java File opened and you hit the F1-Key in the Editor.

This is usefull, because there are so many different Files and Languages used for Web Development.

If you associate for one filetype more than one default helpfiles, the first Help in the List is used.


Filetypes
Filetypes ComboBox

Choose here the Filetype you want to associate this Helpfile.


Cancel

Use this Button, if you want to close this Window, and don’t want to save the Settings.


OK

Use this Button, if you want to save the Settings, and to close this Window.


Replace Root Directory
Replace the Root Directory with the HTTP Address

Check this, if you wish to Preview your documents via an running Server Software.


Root Directory
Root Directory from your Homepage

Enter here the Rootdirectory from your Homepage, this part of the files you want to view will be replaced with the Serveraddress.


Address
Address (with "http://")

Enter here the Address to use instead of the Root Directory.


Picturesdirectory
Picturesdirectory:

Enter here the Directory from your Pitures. You can jump to this Directory with the Dropdownmenu in the Explorer.


Syle Sheets Directory
Style Sheets Directory:

Enter here the Directory from your Style Sheets. You can jump to this Directory with the Dropdownmenu in the Explorer.


JavaScript Directory
JavaScript Directory:

Enter here the Directory from your Java Scripts. You can jump to this Directory with the Dropdownmenu in the Explorer.


Indexfile
Indexfile:

Enter here Indexfile from your Project. You can load this file with the Menuitem “Load Indexfile” from the “Project”-Menu.


Select Window(s)

This list contains all opened Documentwindows. You can select one of them by clicking on it, to select more than only one Window, use the Shift- or the Ctrl-Key and cklick on the requested Items.


Activate

This Button activates the selected Window, and closes this Dialog.


OK

Use this Button to close this Dialog.


Save

This Button saves the selected Window(s) and closes this Dialog.


Close Window(s)

Use this Button to close the selected Window(s) and to close this Dialog. If some Windows were modified and not saved, you’re prompted to save this Documents.


Minimize

This Button minimizes the selected Window(s) and closes this Dialog.


Help

Use this Button to learn more about this Dialog.